In the process of double-anchor chain, the ship will have a twisted condition caused by wind and water. If a single flower or double flower occurs, we must clear it immediately. If it is not clear, then the big ship is not available. Sailing. Cleaning the chain is a very difficult job and requires some technical content. The main way is to use the tugboat to solve one by one. Let's talk about it briefly.
1) Do a good number of cables and several shackles for hanging cables, etc. If you can put down a lifeboat to help you.
2) Twist the “force chain” to let the strands float to the water. If necessary, use a white cable to tie the knot under the strands to avoid the falling of the strands.
3) Release the hanging cable and the safety cable from the side of the ship on the side of the "Idle Chain" to connect the shackle to it. One end of the hanging cable and the safety cable are wrapped around the bollard of the ship's head.
4) Clamp the idler chain with a special machine, then use the windlass to release the idler chain on the deck and wait until another connecting link is placed on the deck.
5) Open the connecting link, how quickly the cable can be untwisted in the chain of the rear chain, and the other end of the cable is fixed on the bollard.
6) Attach one end of the cable to the chain link on the back of the removed idle chain, the other end from the idle chain, wrap it around the other direction around the idle chain, and pull it back from the idle chain. On the reel.
7) Open the chain splicer, take back the cable, relax the cable, and let the zipper chain wrap around the force chain, and still receive the deck from the cable through the idle chain.
8) If it is a single flower, you can attach the chain link, let go of the cable and send the cable, and tighten the chain.
